DTC Detection Logic
|
DTC |
CONSULT screen item |
DTC detected condition |
||||
|
[Trouble diagnosis content] |
[Malfunction type] |
|||||
|
C0663 |
00 |
COMMUNICATION ERROR (INVALID) [One or more signals sent from control unit (Electronic ignition lock control unit) via the CAN bus is implausible] |
[NO SUBTYPE INFORMATION] |
Diagnosis condition |
Ignition switch ON |
|
|
Signal (terminal) |
-- |
|||||
|
Threshold |
If the signal phone call or speech dialogue system active from the electronic ignition switch control unit is invalid (signal value is beyond the valid range) then an error is set. This error is set, when the malfunction detection time is exceeded [Note for malfunction detection time in the service comments column). |
|||||
|
Diagnosis delay time |
1500 ms |
|||||