DTC Detection Logic
|
DTC |
CONSULT screen item |
DTC detected condition |
||||
|
[Trouble diagnosis content] |
[Malfunction type] |
|||||
|
C0766 |
00 |
No CAN message CPA/distronic C/U [No CAN message was received from control unit (COLLISION PREVENTION ASSIST controller unit) or (DISTRONIC electric controller unit)] |
[NO SUBTYPE INFORMATION] |
Diagnosis condition |
Ignition switch ON after 10 seconds |
|
|
Signal (terminal) |
CAN communication signal |
|||||
|
Threshold |
If the message from ICC sensor or distance sensor is incorrect then an error is set. This error is set, when the malfunction detection time is exceeded. |
|||||
|
Diagnosis delay time |
100 ms |
|||||