Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK COMMUNICATION SIGNAL

Turn ignition switch ON.

Check the signal between around view monitor control unit harness connector and ground.

Terminals			Condition	Reference value
(+)		(-)
Around view monitor control unit
Connector	Terminal
B51	67	Ground	"CAMERA" switch is ON or shift position is "R".	Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES

Replace around view monitor control unit. Refer to Removal and Installation .

GO TO 2.

CHECK CONTINUITY COMMUNICATION SIGNAL CIRCUIT FOR OPEN

Turn ignition switch OFF.
Disconnect around view monitor control unit harness connector and front camera harness connector.

Check the continuity between around view monitor control unit harness connector and front camera harness connector.

Around view monitor control unit		Front camera		Continuity
Connector	Terminal	Connector	Terminal	Continuity
B51	67	E116	6	Existed

Is the inspection result normal?

YES

GO TO 3.

Repair or replace malfunctioning parts.

CHECK CONTINUITY COMMUNICATION SIGNAL CIRCUIT FOR SHORT

Check the continuity between around view monitor control unit harness connector and ground.

Around view monitor control unit		Ground	Continuity
Connector	Terminal
B51	67		Not existed

Is inspection result normal?

YES

Replace front camera. Refer to Removal and Installation .

Repair or replace malfunctioning parts.