CONSULT Function: Configuration
WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
Configuration includes functions as follows.
|
Function |
Description |
|
|
Read/Write Configuration |
Before Replace ECU |
Allows the reading of vehicle specification written in sonar control unit to store the specification in CONSULT. |
|
After Replace ECU |
Allows the writing of the vehicle information stored in CONSULT into the sonar control unit. |
|
|
Manual Configuration |
Allows the writing of the vehicle specification into the sonar control unit by hand. |
|
CAUTION:
- When replacing sonar control unit, you must perform "Read / Write Configuration" or "Manual Configuration" with CONSULT.
- Complete the procedure of "Read / Write Configuration" or "Manual Configuration" in order.
- If you set incorrect "Read / Write Configuration" or "Manual Configuration", incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
- Never perform "Read / Write Configuration" or "Manual Configuration" except for new sonar control unit.