Work Procedure (Before Replace Control Valve and TCM)

SAVE TCM DATA
With CONSULT
1. Select "Work Support" in "TRANSMISSION".
2. Perform "SAVING DATA FOR REPLC CPU".
NOTE:
- Necessary data in TCM is copied and saved to CONSULT.
- Go to Step 2 regardless of with or without success in saving data.
GO TO 2.
SAVE ??OPERATION LOG'
With CONSULT

Save Operation Log, according to the procedure of "Programming" in CONSULT Operation Manual.
NOTE:
- Log in to the network, according to the CONSULT screen.
- TCM part number is saved in Operating Log saved in CONSULT.
- After replacing control valve and TCM, perform necessary work.
- Replace control valve and TCM. Refer to Removal and Installation .
- After replacing control valve and TCM, perform necessary work. Refer to Work Procedure (After Replace Control Valve and TCM) .