Anti-Pinch System
- Pinch foreign material in the door glass during AUTO-UP operation, and it is the anti-pinch function that lowers the door glass 125 - 130 mm (4.9 - 5.1 in) when detected.
- Hall sensor continues detecting the movement of power window motor and transmits to hall sensor in power window motor as the hall sensor signal while power window motor is operating.
- Resistance is applied to the power window motor rotation that changes the frequency of Hall sensor signal if foreign material is trapped in the door glass.
- Power window switch controls to lower the window glass for 125 - 130 mm (4.9 - 5.1 in) after it detects hall sensor signal frequency change.
Operation Condition
When all door glass AUTO-UP operation is performed (anti-pinch function does not operate just before the door glass closes and is fully closed)
NOTE:
Depending on environment and driving conditions, if a similar impact or load is applied to the door glass, it may lower.