Application Items

CONSULT performs the following functions via CAN communication using ADAS Control Unit 2.

Diagnosis mode	Description
Configuration	The vehicle specification that is written in ADAS Control Unit 2 can be displayed or stored The vehicle specification can be written when ADAS Control Unit 2 is replaced
Self Diagnostic Result	Displays the name of a malfunctioning system stored in the ADAS Control Unit 2
Data Monitor	Displays ADAS Control Unit 2 input/output data in real time
Active Test	Enables an operational check of a load by transmitting a driving signal from the ADAS Control Unit 2 to the load
ECU Identification	Displays ADAS Control Unit 2 part number
CAN Diag Support Monitor	Displays a reception/transmission state of CAN communication and ITS communication