Bulb Check Action And Fail-Safe Indication.
|
Vehicle condition/Driver's operation |
Blind Spot Warning/Blind Spot Intervention indicator |
Warning buzzer |
Indication on the combination meter |
|
When DTC is detected |
OFF |
Beep |
|
|
When radar blockage is detected |
OFF |
Beep |
Unavailable: Side Radar Obstruction |
|
When the camera detects that the interior temperature is high |
OFF |
Beep |
Unavailable: High Cabin Temp. |
|
When the dynamic driver assistance switch is turned ON with settings of DCA system, LDP system and Blind Spot Intervention system OFF |
OFF |
-- |
Blink (Approx. 3 sec.) |
Fig 1: *: Blinking cycle when the side radar blockage condition or lane camera unit high temperature condition
NOTE:
Time shown in the figure is approximate time.