Detailed Flow
- OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred.
GO TO 2.
- CHECK SYMPTOM
- Check the symptom based on the information obtained from the customer.
- Check if any other malfunctions are present.
GO TO 3.
- CHECK CONSULT SELF-DIAGNOSIS RESULTS
Connect CONSULT and perform self-diagnosis. Refer to DTC Index .
Are self-diagnosis results normal?
YES
GO TO 4.
NO
GO TO 5.
- NARROW DOWN MALFUNCTIONING PARTS BY SYMPTOM DIAGNOSIS
Perform symptom diagnosis. Refer to Symptom Table .
GO TO 5.
- REPAIR OR REPLACE MALFUNCTIONING PARTS
Repair or replace malfunctioning parts.
NOTE: If DTC is displayed, erase DTC after repairing or replacing malfunctioning parts.GO TO 6.
- FINAL CHECK
Check that the warning buzzer in the Combination Meter operates normally.
Does it operate normally?
YES
Inspection End.
NO
GO TO 1.