April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

NOTE:

If Clutch Point Learning is also required, always perform Clutch Point Learning before Select Learning.
Perform Select Learning with CVT fluid temperature below 50 deg. C (122 deg. F) and again with fluid temperature above 50 deg. C (122 deg. F).

PERFORM SELECT LEARNING (DRIVE/REVERSE LEARNING)
1. Set the parking brake.
2. Start the engine and wait 5 seconds.
3. Shift the selector lever to the N position and hold more than 2 seconds, then to D position and wait for transmission engagement.
4. Repeat step 3 ten (10) times.
5. Shift the selector lever to the N position and hold more than 2 seconds, then to R position and wait for transmission engagement.
6. Repeat step 5 ten (10) times.
7. Shift the selector lever to the P position and turn the ignition OFF.
WORK END