Work Procedure

Perform calibration of decel G sensor. Refer to Work Procedure (TYPE 1), Work Procedure (TYPE 2).

GO TO 2.

1. Park the vehicle on a level surface.
2. Adjust air pressure of all tires to the specified pressure. Refer to Tire Air Pressure .

GO TO 3.

With CONSULT

1. Turn ignition switch ON.
   CAUTION: Never start engine.
2. Select "Work Support" in "TRANSMISSION".
3. Select "G SENSOR CALIBRATION".
4. Touch "Start".
   CAUTION: Do not rock or jounce the vehicle during "G sensor calibration".

Is "COMPLETED" displayed?

YES

WORK END

NO

Perform steps 3 again.