LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX80 AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Door & Lock (Diagnostics) >> Description >> System >> Intelligent Key System >> System Description >> Remote Keyless Entry Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Keyless Entry Function

The Intelligent Key has the same functions as the remote control entry system. Therefore, it can be used in the same manner as the remote controller by operating the door lock/unlock button.

OPERATION 

Remote keyless entry system controls operation of the following items.

OPERATION AREA 

To check that the Intelligent Key works normally, use within 1 m (3 ft) range of each doors, however the operable range may differ according to surroundings.

DOOR LOCK/UNLOCK FUNCTION 

OPERATION CONDITION 

If the following condition are satisfied, remote keyless entry operation is performed when the Intelligent Key is operated.

Remote controller operation

Operation condition

Lock

  • Panic alarm is not activated
  • P position warning is not activated

Unlock

Panic alarm is not activated

SELECTIVE UNLOCK FUNCTION 

How to change selective unlock operation mode.

Selective unlock operation mode can be changed using CONSULT.

Refer to Diagnosis Description .

AUTO DOOR LOCK FUNCTION 

After door is unlocked by Intelligent Key button operation and if 60 seconds or more passes without performing the following operation, all doors are locked. However, operation check function does not activate.

Operating condition

  • Door switch is ON (door is open)
  • Door is locked
  • Push switch is pressed

How to change auto door lock operation mode.

Auto door lock mode can be changed using CONSULT.

Refer to Diagnosis Description .

HAZARD AND HORN REMINDER FUNCTION 

When doors are locked or unlocked by Intelligent Key, BCM blinks hazard warning lamps as a reminder.

The hazard and horn reminder has a horn chirp mode (C mode) and a non-horn chirp mode (S mode).

Operating Function of Hazard and Horn Reminder 

C mode

S mode

Intelligent Key operation

Lock

Unlock

Lock

Unlock

Hazard warning lamp blinks

Twice

Once

Twice

--

Horn sound

Once

--

--

--

Hazard and horn reminder does not operate in the following conditions.

How to Change Hazard and Horn Reminder Mode 

SYMBOL With CONSULT

Hazard and horn reminder operation mode can be changed using CONSULT.

Refer to Diagnosis Description .

SYMBOL Without CONSULT

When LOCK and UNLOCK signals are sent from the Intelligent Key for more than 2 seconds at the same time, the hazard and horn reminder mode is changed and hazard warning lamp blinks and horn sounds as per the following items:

G05916043Courtesy of NISSAN NORTH AMERICA, INC.

AUTOMATIC BACK DOOR OPEN/CLOSE FUNCTION 

When back door button of Intelligent Key is pressed for 0.4 second or more, back door open automatically for detailed description. Refer to System Description .

REMOTE ENGINE START FUNCTION 

Engine start can be operated by Intelligent Key button operation.

Refer to System Description .

LIST OF OPERATION RELATED PARTS 

Parts marked with x are the parts related to operation.

Function

Intelligent Key

Door switch

Door lock actuator

Fuel lid lock actuator

Push-button ignition switch

CAN communication system

BCM

IPDM E/R

Horn

Combination meter

Hazard warning lamp

Automatic back door control module

Back door lock assembly

Door lock/unlock function

x

x

x

x

x

Selective unlock function

x

x

x

x

x

Auto door lock function

x

x

x

x

x

x

Hazard and horn reminder function

x

x

x

x

x

x

Automatic back door open/close function

x

x

x

x

x