Operation Description
- When the system is turned ON by operating the warning systems switch, ADAS control unit turns ON the warning systems ON indicator.
- Lane camera unit monitors lane markers of the traveling lane. It transmits the detected lane condition signal to ADAS control unit 2 via Chassis communication.
- When judging from a lane marker detection signal that the vehicle is approaching the lane marker, the ADAS control unit 2 controls the following item to alert the driver.
- Activates warning buzzer by ADAS control unit 2.
- ADAS control unit 2 transmits a lane departure warning lamp signal to combination meter via CAN communication and turns ON/OFF the lane departure warning lamp (yellow).
OPERATING CONDITION
- Warning systems ON indicator: ON
- Vehicle speed: approximately 70 km/h (45 MPH) or more
- Turn indicator signal: After 2 seconds or more from turned OFF
NOTE:
- LDW system ON/OFF can be set on the navigation screen.
- After the operating conditions of warning are satisfied, the warning continues until the vehicle speed reaches approximately 60 km/h (40 MPH)
- LDP ON indicator lamp is OFF.
- The LDW system may not function properly, depending on the situation. Refer to Handling Precaution .