LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX80 AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance System (Diagnostics) (2 Of 2) >> Basic Inspection >> ADAS Control Unit >> Additional Service When Replacing ADAS Control Unit >> Work Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

Always perform the ADAS control unit configuration after replacing the ADAS control unit.

NOTE: Models with FEB system only.
  1. ADAS CONTROL UNIT CONFIGURATION (WITH FEB MODELS) 

    Perform the ADAS control unit configuration with CONSULT. Refer to Work Procedure .

    GO TO 2.

  2. PERFORM SELF-DIAGNOSIS 

    Perform the self-diagnosis of ADAS control unit with CONSULT. Check if any DTC is detected.

    Is any DTC detected?

    YES

    Perform the trouble diagnosis for the detected DTC. Refer to DTC Index .

    NO

    INSPECTION END

scientia non olet · About LEMON Manuals