Application Items

CONSULT performs the following functions via the communication with the around view monitor control unit.

Diagnosis mode	Description
ECU Identification	Around view monitor control unit part number, software version, and hardware version can be identified.
Self Diagnostic Results	Around view monitor control unit and AV communication circuit connection diagnosis is performed. Current and previous malfunctions are displayed collectively.
Data Monitor	Diagnosis of vehicle signal that is received by around view monitor control unit can be performed.
Work Support	Calibration and initialization of each camera can be performed. Fine tuning of Birds-Eye view can be performed. Target line calibration of rear wide view can be performed. Display of predicted course line can be switched to ON/OFF. Language of warning message can be selected. Neutral position adjustment of steering angle sensor can be performed. Camera screen activation enhancing display can be switched to ON/OFF. Calibration of turning radius display can be performed. Setting change can be performed depending on the vehicle specification with/without door mirror automatic retracting function. "SONAR OFF" display can be switched to ON/OFF. Camera zoom ratio can be changed and used for fine tuning.
Configuration	The vehicle specification that is written in around view monitor control unit can be displayed or stored. The vehicle specification can be written when around view monitor control unit is replaced.