Confirmation/Adjustment Mode
- Start the diagnosis function and select "Confirmation/Adjustment". The confirmation/adjustment mode indicates where each item can be checked or adjusted.
- Select each switch on the "Confirmation/Adjustment Mode" screen to display the relevant trouble diagnosis screen. Touch the "Back" to return to the initial Confirmation/Adjustment Mode screen.
Display Diagnosis
Confirmation of the display control unit screen and integral switch screen.
|
Item |
Description |
|
|
Display Settings |
Color Spectrum Bar |
|
|
Gradation Bar |
Display 64 gradation gray-scale image to a screen. |
|
|
White Display |
Display white screen. |
|
|
Black Display |
Display black screen. |
|
|
Touch Panel |
|
|
|
Sensor Sensitivity Setting |
|
|
Vehicle Signals
A comparison check can be made of each actual vehicle signal and the signals recognized by the system.
|
Diagnosis item |
Display |
Vehicle status |
Remarks |
|
Vehicle Speed |
ON |
Vehicle speed > 0 km/h (0 MPH) |
Changes in indication may be delayed. This is normal. |
|
OFF |
Vehicle speed = 0 km/h (0 MPH) |
||
|
Parking Brake Signal |
ON |
Parking brake is applied. |
|
|
OFF |
Parking brake is released. |
||
|
Light Signal |
ON |
Block the light beam from the auto light optical sensor when the light switch is ON. |
-- |
|
OFF |
Either of the following conditions
|
||
|
Ignition Signal |
ON |
Ignition switch ON. |
-- |
|
OFF |
Ignition switch in ACC position. |
||
|
Reverse Signal |
ON |
Shift the selector lever to "R" position. |
Changes in indication may be delayed. This is normal. |
|
OFF |
Shift the selector lever other than "R" position. |
|
Diagnosis item |
Display |
Vehicle status |
Remarks |
|
Vehicle Speed |
ON |
Vehicle speed > 0 km/h (0 MPH) |
Changes in indication may be delayed. This is normal. |
|
OFF |
Vehicle speed = 0 km/h (0 MPH) |
||
|
Ignition Signal |
ON |
Ignition switch ON. |
-- |
|
OFF |
Ignition switch in ACC position. |
||
|
Reverse Signal |
ON |
Shift the selector lever to "R" position. |
Changes in indication may be delayed. This is normal. |
|
OFF |
Shift the selector lever other than "R" position. |
Speaker Test
Select "Speaker Test" to display the speaker diagnosis screen. Touch "Start" to generate a test tone in a speaker. Touch "Next" to generate a test tone in the next speaker. Touch "End" to stop the test tones.
Navigation
|
Item |
Description |
|
Sensor Information |
The reception status of GPS can be confirmed. |
|
Route Simulation |
Set the display ON/OFF of the "simulation" menu of the navigation. |
Error History
The self-diagnosis results are judged depending on whether any error occurs from when "Self-diagnosis" is selected until the self-diagnosis results are displayed.
However, the diagnosis results are judged normal if an error has occurred before the ignition switch is turned ON and then no error has occurred until the self-diagnosis start. Check the "Error Record" to detect any error that may have occurred before the self-diagnosis start because of this situation.
The error record displays the time and place of the most recent occurrence of that error. However, take note of the following points.
- Place of the error occurrence is represented by the longitude and latitude at the time an error occurred. If current location mark has deviated from the correct position, then the place of the error occurrence cannot be located correctly.
- The frequency of occurrence is displayed in a up-and-down manner.
Count up method
- The counter resets to 0 if an error occurs when ignition switch is turned ON. The counter increases by 1 if the condition is normal at a next ignition ON cycle.
- The counter upper limit is 39. Any counts exceeding 39 are ignored." The counter can be reset (no error record display) with the "Delete log" switch or CONSULT.
|
Display type of occurrence frequency |
Error history display item |
|
Count up method |
CAN communication line, control unit (CAN), AV communication line, control unit (AV) |
Error item
Some error items may be displayed simultaneously according to the cause. If some error items are displayed simultaneously, the detection of the cause can be performed by the combination of display items
|
Error item |
Applicable DTC |
Reference |
|
CAN COMM CIRCUIT |
U1000 |
Refer to DTC Description . |
|
CONTROL UNIT (CAN) |
U1010 |
Refer to DTC Description . |
|
Control unit internal error |
U121F |
Refer to DTC Description . |
|
Mismatched configuration data stored |
U1223 |
Refer to DTC Description . |
|
Amplifier temperature error |
U1231 |
Refer to DTC Description . |
|
Steer. Angle Sensor calibration |
U1232 |
Refer to DTC Description . |
|
Navi unit internal error |
U1233 |
Refer to DTC Description . |
|
Audio unit internal error |
U1234 |
Refer to DTC Description . |
|
Switches Connection Error |
U1240 |
Refer to DTC Description . |
|
GPS Antenna error |
U1244 |
Refer to DTC Description . |
|
Audio unit connection error |
U1249 |
Refer to DTC Description . |
|
XM Antenna connection error : open |
U1258 |
Refer to DTC Description . |
|
XM Antenna connection error : short |
||
|
AVM connection error |
U125B |
Refer to DTC Description . |
|
Navi unit connection error |
U125D |
Refer to DTC Description . |
|
TCU connection error |
U1266 |
Refer to DTC Description . |
|
Confirm user connection unit |
U12B7 |
Refer to DTC Description . |
|
IT Commander connection error |
U12BA |
Refer to DTC Description . |
|
Radio Antenna error : open |
U12BE |
Refer to DTC Description . |
|
Radio Antenna error : short |
||
|
RSE Unit connection error |
U12C0 |
Refer to DTC Description . |
|
Rear Right Display Connection Error |
U12C1 |
Refer to DTC Description . |
|
Rear Left Display Connection Error |
U12C2 |
Refer to DTC Description . |
|
Rear Right Display High Temperature |
U12C3 |
Refer to DTC Description . |
|
Rear Left Display High Temperature |
U12C4 |
Refer to DTC Description . |
|
RSE Unit Error |
U12C5 |
Refer to DTC Description . |
|
RSE Unit High Temperature |
U12C6 |
Refer to DTC Description . |
|
AV COMM CIRCUIT |
U1300 |
Refer to DTC Description . |
|
CONTROL UNIT (AV) |
U1310 |
Refer to DTC Description . |
|
FL-DOOR woofer OUT: Open |
U1601 |
Refer to DTC Description . |
|
FL-DOOR woofer OUT: Short |
||
|
FL-DOOR woofer OUT: Short to ground |
||
|
FL-DOOR woofer OUT: Short to battery |
||
|
FR-DOOR woofer OUT: Open |
U1609 |
Refer to DTC Description . |
|
FR-DOOR woofer OUT: Short |
||
|
FR-DOOR woofer OUT: Short to ground |
||
|
FR-DOOR woofer OUT: Short to battery |
||
|
F-INST L-squawker OUT: Open |
U1626 |
Refer to DTC Description . |
|
F-INST L-squawker OUT: Short |
||
|
F-INST L-squawker OUT: Short to ground |
||
|
F-INST L-squawker OUT: Short to battery |
||
|
F-INST C-squawker OUT: Open |
U162A |
Refer to DTC Description . |
|
F-INST C-squawker OUT: Short |
||
|
F-INST C-squawker OUT: Short to ground |
||
|
F-INST C-squawker OUT: Short to battery |
||
|
F-INST R-squawker OUT: Open |
U162E |
Refer to DTC Description . |
|
F-INST R-squawker OUT: Short |
||
|
F-INST R-squawker OUT: Short to ground |
||
|
F-INST R-squawker OUT: Short to battery |
||
|
2L-DOOR speaker OUT: Open |
U1684 |
Refer to DTC Description . |
|
2L-DOOR speaker OUT: Short |
||
|
2L-DOOR speaker OUT: Short to ground |
||
|
2L-DOOR speaker OUT: Short to battery |
||
|
2R-DOOR speaker OUT: Open |
U168C |
Refer to DTC Description . |
|
2R-DOOR speaker OUT: Short |
||
|
2R-DOOR speaker OUT: Short to ground |
||
|
2R-DOOR speaker OUT: Short to battery |
||
|
R-LUGGAGE L-woofer OUT: Open |
U175D |
Refer to DTC Description . |
|
R-LUGGAGE L-woofer OUT: Short |
||
|
R-LUGGAGE L-woofer OUT: Short to ground |
||
|
R-LUGGAGE L-woofer OUT: Short to battery |
||
|
R-ROOF L-squawker OUT: Open |
U176A |
Refer to DTC Description . |
|
R-ROOF L-squawker OUT: Short |
||
|
R-ROOF L-squawker OUT: Short to ground |
||
|
R-ROOF L-squawker OUT: Short to battery |
||
|
R-ROOF R-squawker OUT: Open |
U1772 |
Refer to DTC Description . |
|
R-ROOF R-squawker OUT: Short |
||
|
R-ROOF R-squawker OUT: Short to ground |
||
|
R-ROOF R-squawker OUT: Short to battery |
AV COMM Diagnosis
AV COMM Monitor
- Displays the communication status between display control unit (master unit) and each unit.
- The error counter displays "OK" if any malfunction was not detected in the past and displays "0" if a malfunction is detected. It increases by 1 if the condition is normal at the next ignition switch ON cycle. The upper limit of the counter is 39.
- The error counter is erased if "Reset" is pressed.
Items
Status
(Current)
Counter
(Past)
CMF Send Switch
OK / UNKW
OK / 0 - 39 / --
CMF Receive Switch
OK / UNKW
OK / 0 - 39 / --
CMF Receive AVM
OK / UNKW
OK / 0 - 39 / --
CMF Receive Audio
OK / UNKW
OK / 0 - 39 / --
CMF Receive RSE
OK / UNKW
OK / 0 - 39 / --
Clock Setting
The date and time information can be adjusted.
Camera Control (with rear view monitor system)
|
Item |
Description |
|
Adjust Guide Line of Rear View Cam |
The guiding lines in the rear view monitor can be adjusted. |
|
Check/Change Configuration |
Displays the current configuration data.
NOTE:
Refer to the following list for the items of the configuration adjustment function.
|
|
Reset Configuration |
Initializes the camera system configuration. |
|
Camera System Type |
Sets the type of camera that is connected. |
|
Setting item |
Setting |
Setting item |
Setting |
|
Predi. Course Lines |
With |
Wheelbase |
3.0750000 |
|
Rear Coeff. K |
-38009.06 |
Total Length |
0.0000000 |
|
Rear Coeff. F |
0.0014620 |
Steering Gear Ratio |
19.440000 |
|
Rear Coeff. P1 |
0.0000062 |
Side Coeff. K |
0.0000000 |
|
Rear Coeff. P2 |
0.0000056 |
Side Coeff. F |
|
|
Rear Coeff. C1 |
823.00000 |
Side Coeff. P1 |
|
|
Rear Coeff. C2 |
480.00000 |
Side Coeff. P2 |
|
|
Rear Coeff. D1 |
800.00000 |
Side Coeff. C1 |
|
|
Rear Coeff. D2 |
494.00000 |
Side Coeff. C2 |
|
|
Car Width |
1.9990000 |
Side Coeff. D1 |
|
|
Rear Offset |
0.2200000 |
Side Coeff. D2 |
|
|
Rear Height |
1.1267300 |
Side Offset |
|
|
Rear L/R Angle |
0.0000000 |
Overall Height |
|
|
Rear Up/Dn Angle |
45.020000 |
Side L/R Angle |
|
|
Rear Roll Angle |
0.0000000 |
Side Up/Dn Angle |
|
|
Bumper Rear Dist. |
0.0678300 |
Side Roll Angle |
|
|
Bumper Rear Ax Dist |
1.1445000 |
Side Front End Dist |
|
|
Steer. Max Angle |
666.79200 |
Total Width |
|
|
Min. Turning Rad. |
5.9000001 |
-- |
-- |
SMX
|
Item |
Description |
|
Show XM Diagnosis |
Display adjustment items to test satellite radio function. |
|
External Connection Mode |
Set in external diagnostic mode. |
Delete Unit Connection Log
Deletes any unit connection records and error records from the display control unit memory. (Clear the records of the unit that has been removed.)
Reset Settings
|
Item |
Description |
|
Reset User Data |
Initializes the display control unit, NAVI control unit and AV control unit memory. |
|
Reset Configuration |
Initializes the configuration data. |
Version Information
Version information of the each control unit and switch is displayed.
Program Update
Version of the display control unit can be update.
Hands-Free Phone
The hands-free phone reception volume adjustment and microphone and speaker test functions are also available.
|
Item |
Description |
|
HF Vol. Adjustment |
The reception volume can be set in three steps: "Low", "Standard" and "High". |
|
Voice Microphone Test |
The microphone audio can be directly connected to the speakers to perform a microphone test. |
|
Onload model ID |
Displays the on board unit ID. |