Component Function Check

With CONSULT

1. Turn ignition switch ON.
2. Select "VHCL SPD SIG" in "DATA MONITOR" mode of "MULTI AV" using CONSULT.
3. Check the status of "VHCL SPD SIG" as per the following condition.

   Monitor item	Condition	Status
   VHCL SPD SIG	Vehicle speed > 0 km/h (0 MPH)	On
   	Vehicle speed = 0 km/h (0 MPH)	Off

Is the inspection result normal?

YES

INSPECTION END

NO

Refer to Diagnosis Procedure .