FRONT FINAL DRIVE DIFFERENTIAL ASSEMBLY : Exploded View

1.

Bushing

2.

Bearing cap

3.

Side bearing

4.

Side bearing adjusting washer

5.

Drive pinion

6.

Pinion height adjusting washer

7.

Pinion rear bearing

8.

Collapsible spacer

9.

Gasket

10.

Drain plug

11.

Side oil seal (left side)

12.

Pinion front bearing

13.

Front oil seal

14.

Companion flange

15.

Drive pinion lock nut

16.

Gear carrier

17.

Side shaft

18.

Side shaft bearing

19.

Snap ring

20.

Snap ring

21.

Side oil seal (right side)

22.

Drive gear

23.

Differential case assembly

24.

Housing spacer

25.

Filler plug

26.

Carrier cover

A:

Oil seal lip

B:

Screw hole

C.

Comply with the assembly procedure when tightening. Refer to FRONT FINAL DRIVE DIFFERENTIAL ASSEMBLY : Disassembly & Assembly .

: N.m (kg-m, ft-lb)

: Always replace after every disassembly.

: Select with proper thickness.

: Apply gear oil.

: Apply anti-corrosion oil.

: Apply multi-purpose grease.

: Apply Genuine Silicone RTV or equivalent. Refer to MAINTENANCE : Recommended Fluid and Lubricants .

: Apply Genuine High Strength Thread Locking Sealant or equivalent. Refer to MAINTENANCE : Recommended Fluid and Lubricants .