LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX80 AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Diagnostics) (2 Of 2) >> Component/Circuit Diagnosis >> EOP Sensor >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

  1. CHECK EOP SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect EOP sensor harness connector.
    3. Check resistance between EOP sensor connector terminals.

      +

      -

      Condition

      Resistance (k Ohms)

      EOP sensor

      Terminal

      1

      2

      None

      4 k Ohms- 10 k Ohms

      3

      2 k Ohms- 8 k Ohms

      2

      1

      4 k Ohms- 10 k Ohms

      3

      1 k Ohms- 3 k Ohms

      3

      1

      2 k Ohms- 8 k Ohms

      2

      1 k Ohms- 3 k Ohms

    Is the inspection result normal?

    YES

    INSPECTION END.

    NO

    Replace EOP sensor. Refer to Exploded View .

scientia non olet · About LEMON Manuals