REAR FINAL DRIVE DIFFERENTIAL ASSEMBLY : Exploded View

1.

Rear cover

2.

Bearing cap

3.

Side gear thrust washer

4.

Side gear

5.

Pinion mate thrust washer

6.

Pinion mate gear

7.

Pinion mate shaft

8.

Lock pin

9.

Side bearing

10.

Side bearing adjusting washer

11.

Drive pinion

12.

Pinion height adjusting washer

13.

Pinion rear bearing

14.

Collapsible spacer

15.

Side flange

16.

Circlip

17.

Side oil seal

18.

Gear carrier

19.

Pinion front bearing

20.

Front oil seal

21.

Companion flange

22.

Drive pinion lock nut

23.

Drive gear

24.

Differential case

25.

Gasket

26.

Drain plug

27.

Filler plug

A.

Oil seal lip

B.

Screw hole

C.

Comply with the assembly procedure when tightening. Refer to REAR FINAL DRIVE DIFFERENTIAL ASSEMBLY : Disassembly & Assembly .

: N.m (kg-m, ft-lb)

: Always replace after every disassembly.

: Apply gear oil.

: Apply anti-corrosion oil.

: Select with proper thickness.

: Apply multi-purpose grease.

: Apply Genuine Silicone RTV or equivalent. Refer to MAINTENANCE : Recommended Fluid and Lubricants .

: Apply Genuine High Strength Thread Locking Sealant or equivalent. Refer to MAINTENANCE : Recommended Fluid and Lubricants .