Remote Engine Start Function

Remote engine start function enables engine to be started from vehicle outside by operating REMOTE ENGINE START button of Intelligent Key or mobile phone.

In the same way as the Intelligent Key, the engine can be started by operating a cellular phone using the Telematics system function. For details, Refer to System Description .

Engine Start Procedures

The following operation enables the engine to be started.

Press LOCK button of Intelligent Key, and then within 5 seconds, press and hold REMOTE ENGINE START button of Intelligent Key for 2 seconds or more.
Perform engine start operation using a cellular phone.

Engine does not start while the vehicle is in the following status.

All doors are UNLOCK or any door is open.
Hood is open.
A registered Intelligent Key is in passenger room.
Shift position is other than P.
Vehicle security alarm is in operation
Hazard lamp is in operation.

NOTE:

During remote engine run mode, the following display is indicated on information display in combination meter.

Display	Display ON condition	Display OFF condition
Courtesy of NISSAN NORTH AMERICA, INC.	During remote engine run mode	Mode switch to normal engine run mode from remote engine run mode

While engine is in operation by Intelligent Key, engine status changes from remote engine run mode to normal engine run mode when push-button ignition switch is operated while brake pedal is depressed. The vehicle becomes available to drive.

Engine Stop Procedures

The following operation enables the engine to be stopped.

Press REMOTE ENGINE START button of Intelligent Key.
Perform engine stop operation using a cellular phone.
Push-button ignition switch is operated.

Engine stops when the vehicle status changes to the following status

10 minutes are passed since engine start.
Hood is open.
Shift position is shifted to a position other than P.
Vehicle security alarm starts to operate.

NOTE: While engine is in operation by Intelligent Key, engine operation time can be extended for 10 minutes. To extend engine operation time, press LOCK button of Intelligent Key, and then within 5 seconds, press and hold REMOTE ENGINE START button of Intelligent Key for 2 seconds or more.

Operation Area

The engine can be started when the vehicle is under the following conditions.

The remote engine start operating range is approximately 60 m (197 ft.) from the vehicle.
The vehicle is within the communication range of the Infiniti Connection? data center.