LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX80 AWD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control System (Diagnostics) >> Component/Circuit Diagnosis >> Brake Warning Lamp >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK BRAKE WARNING LAMP FUNCTION (1) 

    Check that brake warning lamp in combination meter turns ON for approx. 1 second after ignition switch is turned ON.

    CAUTION: Never start engine.

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    Proceed to diagnosis procedure. Refer to Diagnosis Procedure .

  2. CHECK BRAKE WARNING LAMP FUNCTION (2) 

    Check that brake warning lamp in combination meter turns ON/OFF when parking brake is operated.

    NOTE: Brake warning lamp turns ON when parking brake is operated (when parking brake switch is ON).

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    Check parking brake switch system. Refer to Diagnosis Procedure .

  3. CHECK BRAKE WARNING LAMP FUNCTION (3) 

    Check that brake warning lamp in combination meter turns ON/OFF when brake fluid level switch is operated while brake fluid level in reservoir tank is with the specified level.

    NOTE: Brake warning lamp turns ON when brake fluid is less than the specified level (when brake fluid level switch is ON).

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Check brake fluid level switch system. Refer to Diagnosis Procedure .

scientia non olet · About LEMON Manuals