Component Inspection

WARNING: This page is about a different car, the 2020 Infiniti QX80. However, it is still accessible from the selected car via links, so may be relevant.

CHECK A/T SHIFT SELECTOR (DETENTION SWITCH)

Turn ignition switch OFF.
Disconnect A/T shift selector connector.

Check continuity between A/T shift selector (detention switch) terminals.

A/T shift selector (detention switch)		Condition		Continuity
Terminal
13	14	Selector lever	P position	Not existed
			Other than above	Existed

Is the inspection result normal?

YES

INSPECTION END

Replace A/T shift selector. Refer to A/T SHIFT SELECTOR : Removal & Installation .