Symptom Table

WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Symptoms	Check items		Probable malfunction location
Screen is not switched to camera image, when camera switch is pressed and when shift position is shifted to the reverse position.	"AVM" is not displayed on the system selection screen of CONSULT.		Around view monitor control unit power supply circuit BAT power supply circuit Ignition power supply circuit ACC power supply circuit
	Check that the following data monitor items operate normally using CONSULT Camera switch signal Reverse signal	Camera switch signal and reverse signal are normal	Around view monitor control unit
		Camera switch signal or reverse signal is not normal	AV communication circuit
Screen is switched when pressing camera switch or shifting selector lever to the reverse position, however, all views are not displayed.	Only superimposing is displayed (only images that AV control unit plots are displayed).		Camera image signal circuit Refer to Diagnosis Procedure .
	Superimposing is not displayed.		Display control unit Refer to CONSULT Function
The screen is not switched to the rear view image even if the selector is shifted to the reverse position.	The front view is displayed normally.		Reverse signal circuit
Front of top view screen is displayed. Front view screen is not displayed.	Check the following data monitor items using CONSULT. Front camera image signal Front view camera communication status Front camera communication line	Image signal: NG Communication status: NG Communication line: NG	Front camera power supply circuit and image signal circuit Refer to Diagnosis Procedure .
		Image signal: OK Communication status: NG Communication line: NG	Front camera communication circuit Refer to Diagnosis Procedure .
Rear of top view screen is not displayed. The rear view screen is not displayed.	Check the following data monitor items using CONSULT. Rear camera image signal Rear camera communication status Rear camera communication line	Image signal: NG Communication status: NG Communication line: NG	Rear camera power supply circuit and image signal circuit Refer to Diagnosis Procedure .
		Image signal: OK Communication status: NG Communication line: NG	Rear camera communication signal circuit Refer to Diagnosis Procedure .
Left side of top view screen is not displayed. The side view screen is not displayed.	Check the following data monitor items using CONSULT. Side camera LH image signal Side camera LH communication status Side camera LH communication line	Image signal: NG Communication status: NG Communication line: NG	Side camera LH power supply circuit and image signal circuit Refer to Diagnosis Procedure .
		Image signal: OK Communication status: NG Communication line: NG	Side camera LH communication circuit Refer to Diagnosis Procedure .
Right side of top view image is not displayed. The side view screen is not displayed. (RHD models)	Check the following data monitor items using CONSULT. Side camera RH image signal Side camera RH communication status Side camera RH communication line	Image signal: NG Communication status: NG Communication line: NG	Side camera RH power supply circuit and image signal circuit Refer to Diagnosis Procedure .
		Image signal: OK Communication status: NG Communication line: NG	Side camera RH communication circuit Refer to Diagnosis Procedure .
MOD warning operates while door mirror is in retracting operation.	-		Retract motor operation signal circuit Refer to Diagnosis Procedure .