Values On The Diagnosis Tool

WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item	Condition		Value/Status
MAIN SW	Ignition switch ON	When MAIN switch is pressed	On
		When MAIN switch is not pressed	Off
SET/COAST SW	Ignition switch ON	When SET/COAST switch is pressed	On
		When SET/COAST switch is not pressed	Off
CANCEL SW	Ignition switch ON	When CANCEL switch is pressed	On
		When CANCEL switch is not pressed	Off
RESUME/ACC SW	Ignition switch ON	When RESUME/ACCELERATE switch is pressed	On
		When RESUME/ACCELERATE switch is not pressed	Off
DISTANCE SW	Ignition switch ON	When DISTANCE switch is pressed	On
		When DISTANCE switch is not pressed	Off
CRUISE OPE	Drive the vehicle and activate the vehicle-to-vehicle distance control mode	When ICC system is controlling	On
		When ICC system is not controlling	Off
ON ROOT GUIDANCE	NOTE: The item is displayed, but not used		Off
BRAKE SW	Ignition switch ON	When brake is depressed	Off
		When brake is not depressed	On
STOP LAMP SW	Ignition switch ON	When brake pedal is depressed	On
		When brake pedal is not depressed	Off
CLUTCH SW SIG	NOTE: The item is displayed, but not used		Off
IDLE SW	Engine running	Idling	On
		Except idling (depress accelerator pedal)	Off
SET DISTANCE	Start the engine and turn the ICC system ON Press the DISTANCE switch to change the vehicle-to-vehicle distance setting	When set to "long"	Long
		When set to "middle"	Mid
		When set to "short"	Short
CRUISE LAMP	Start the engine and press MAIN switch	ICC system ON (MAIN switch indicator ON)	On
		ICC system OFF (MAIN switch indicator OFF)	Off
OWN VHCL	Start the engine and press MAIN switch	ICC system ON (Own vehicle indicator ON)	Off
		ICC system OFF (Own vehicle indicator OFF)	Off
VHCL AHEAD	Drive the vehicle and activate the vehicle-to-vehicle distance control mode	When a vehicle ahead is detected (vehicle ahead detection indicator ON)	On
		When a vehicle ahead is not detected (vehicle ahead detection indicator OFF)	Off
ICC WARNING	Start the engine and press MAIN switch	When ICC system is malfunctioning	On
		When ICC system is normal	Off
VHCL SPEED SE	While driving		Displays the vehicle speed calculated by ADAS control unit
SET VHCL SPD	While driving	When vehicle speed is set	Displays the set vehicle speed
BUZZER O/P	Engine running	When the buzzer of the following system operates Vehicle-to-vehicle distance control mode Intelligent Distance Control system Intelligent Forward Collision Warning system Automatic Emergency Braking system	On
		When the buzzer of the following system not operates Vehicle-to-vehicle distance control mode Intelligent Distance Control system Intelligent Forward Collision Warning system Automatic Emergency Braking system	Off
THRTL SENSOR	NOTE: The item is displayed, but not used		0.0
ENGINE RPM	Engine running		Equivalent to tachometer reading
WIPER SW	Ignition switch ON	Wiper not operating	Off
		Wiper LO operation	Low
		Wiper HI operation	High
NAVI-ICC DISP	NOTE: The item is displayed, but not used		Off
YAW RATE	NOTE: The item is displayed, but not used		0.0
BA WARNING	Engine running	Automatic Emergency Braking warning lamp ON When Automatic Emergency Braking system is malfunctioning When Automatic Emergency Braking system is turned to OFF	On
		Automatic Emergency Braking warning lamp OFF When Automatic Emergency Braking system is normal When Automatic Emergency Braking system is turned to ON	Off
STP LMP DRIVE	Drive the vehicle and activate the vehicle-to-vehicle distance control mode	When ICC brake hold relay is activated	On
		When ICC brake hold relay is not activated	Off
D RANGE SW	Engine running	When the selector lever is in "D" position or manual mode	On
		When the selector lever is in any position other than "D" or manual mode	Off
NP RANGE SW	Engine running	When the selector lever is in "N", "P" position	On
		When the selector lever is in any position other than "N", "P"	Off
PKB SW	Ignition switch ON	When the parking brake is applied	On
		When the parking brake is released	Off
PWR SUP MONI	Engine running		Power supply voltage value of ADAS control unit
VHCL SPD AT	While driving		Value of A/T vehicle speed sensor signal
THRTL OPENING	Engine running	Depress accelerator pedal	Displays the throttle position
GEAR	While driving		Displays the gear position
NP SW SIG	NOTE: The item is displayed, but not used		Off
MODE SIG	Start the engine and press MAIN switch	When ICC system is deactivated	Off
		When vehicle-to-vehicle distance control mode is activated	ICC
		When conventional (fixed speed) cruise control mode is activated	ASCD
SET DISP IND	Drive the vehicle and activate the conventional (fixed speed) cruise control mode Press SET/COAST switch	SET switch indicator ON	On
		SET switch indicator OFF	Off
DISTANCE	Drive the vehicle and activate the vehicle-to-vehicle distance control mode	When a vehicle ahead is detected	Displays the distance from the preceding vehicle
		When a vehicle ahead is not detected	0.0
RELATIVE SPD	Drive the vehicle and activate the vehicle-to-vehicle distance control mode	When a vehicle ahead is detected	Displays the relative speed.
		When a vehicle ahead is not detected	0.0
DYNA ASIST SW	Ignition switch ON	When dynamic driver assistance switch is pressed	On
		When dynamic driver assistance switch is not pressed	Off
DCA ON IND	Start the engine and press dynamic driver assistance switch (When Intelligent Distance Control setting is ON)	Intelligent Distance Control system OFF	Off
		Intelligent Distance Control system ON	On
DCA VHL AHED	Drive the vehicle and activate the Intelligent Distance Control system	When a vehicle ahead is not detected (vehicle ahead detection indicator OFF)	Off
		When a vehicle ahead is detected (vehicle ahead detection indicator ON)	On
IBA SW	NOTE: The item is displayed, but not used		Off
FCW SYSTEM ON	Ignition switch ON	When the Intelligent Forward Collision Warning system is ON	On
		When the Intelligent Forward Collision Warning system is OFF	Off
APA TEMP	Engine running		Display the accelerator pedal actuator integrated motor temperature
APA PWR	Ignition switch ON		Power supply voltage value of accelerator pedal actuator
LDW SYSTEM ON	Ignition switch ON	When the LDW system is ON	On
		When the LDW system is OFF	Off
LDW ON LAMP	Ignition switch ON	When the LDW system is ON	On
		When the LDW system is OFF	Off
LDP ON IND	Start the engine and press dynamic driver assistance switch (When Intelligent Lane Intervention system setting is ON)	When the LDW system is ON	On
		When the LDW system is OFF	Off
LANE DPRT W/L	Drive the vehicle and activate the LDW system or Intelligent Lane Intervention system	Lane departure warning ON	On
		Lane departure warning OFF	Off
LDW BUZER OUTPUT	Drive the vehicle and activate the LDW/Intelligent Lane Intervention system or Blind Spot Warning/Intelligent Blind Spot Intervention system	When the buzzer of the following system operates LDW/Intelligent Lane Intervention system Blind Spot Warning/Intelligent Blind Spot Intervention system	On
		When the buzzer of the following system does not operate LDW/Intelligent Lane Intervention system Blind Spot Warning/Intelligent Blind Spot Intervention system	Off
LDP SYSTEM ON	Start the engine and press dynamic driver assistance switch (When Intelligent Lane Intervention system setting is ON)	When the Intelligent Lane Intervention system is ON	On
		When the Intelligent Lane Intervention system is OFF	Off
WARN REQ	Drive the vehicle and activate the Intelligent Lane Intervention system	Lane departure warning is operating	On
		Lane departure warning is not operating	Off
READY signal	Start the engine and press dynamic driver assistance switch (When Intelligent Lane Intervention system setting is ON)	When the Intelligent Lane Intervention system is ON	On
		When the Intelligent Lane Intervention system is OFF	Off
Camera lost	Drive the vehicle and activate the LDW system, Intelligent Lane Intervention system or Intelligent Blind Spot Intervention system	Both side lane markers are detected	Detect
		Deviate side lane marker is lost	Deviate
		Both side lane markers are lost	Both
Shift position	Engine running While driving		Displays the shift position
Turn signal	Turn signal lamps OFF		Off
	Turn signal lamp LH blinking		LH
	Turn signal lamp RH blinking		RH
	Turn signal lamp LH and RH blinking		LH&RH
SIDE G	While driving	Vehicle turning right	Negative value
		Vehicle turning left	Positive value
STATUS signal	Drive the vehicle and activate the Intelligent Lane Intervention system	When the Intelligent Lane Intervention system is ON	Stnby
		When the Intelligent Lane Intervention system is operating	Warn
		When the Intelligent Lane Intervention system is canceled	Cancl
		When the Intelligent Lane Intervention system is OFF	Off
Lane unclear	While driving	Lane marker is unclear	On
		Lane marker is clear	Off
FUNC ITEM	Ignition switch ON		FUNC 3
FUNC ITEM (NV-ICC)	NOTE: The item is displayed, but not used		Off
FUNC ITEM (NV-DCA)	NOTE: The item is displayed, but not used		Off
DCA SELECT	Ignition switch ON	"Intelligent Distance Control" set with the integral switch is ON	On
		"Intelligent Distance Control" set with the integral switch is OFF	Off
LDP SELECT	Ignition switch ON	"Intelligent Lane Intervention" set with the integral switch is ON	On
		"Intelligent Lane Intervention" set with the integral switch is OFF	Off
BSI SELECT	Ignition switch ON	"Intelligent Blind Spot Intervention" set with the integral switch is ON	On
		"Intelligent Blind Spot Intervention" set with the integral switch is OFF	Off
BSW SELECT	Ignition switch ON	"Blind Spot Warning" set with the integral switch is ON	On
		"Blind Spot Warning" set with the integral switch is OFF	Off
NAVI ICC SELECT	NOTE: The item is displayed, but not used		Off
NAVI DCA SELECT	NOTE: The item is displayed, but not used		Off
SYS SELECTABILITY	Ignition switch ON	Items set with the integral switch can be switched normally	On
		Items set with the integral switch cannot be switched normally	Off
4WD SW	Engine running	4WD shift switch position is in AUTO	AUTO
		4WD shift switch position is in 4H	4H
		4WD shift switch position is in 4L	4L
WARN SYS SW	Ignition switch ON	When warning systems switch is pressed	On
		When warning systems switch is not pressed	Off
BSW/BSI WARN LMP	Ignition switch ON	When the BSW system is malfunctioning	On
		When the BSW system is normal	Off
BSI ON IND	Ignition switch ON	Intelligent Blind Spot Intervention warning ON	On
		Intelligent Blind Spot Intervention warning OFF	Off
BSW SYSTEM ON	Ignition switch ON	When the BSW system is ON	On
		When the BSW system is OFF	Off
BSI SYSTEM ON	Start the engine and press dynamic driver assistance switch (When Intelligent Blind Spot Intervention system setting is ON)	When the Intelligent Blind Spot Intervention system is ON	On
		When the Intelligent Blind Spot Intervention system is OFF	Off
BCI SYSTEM ON	Engine running	When the Intelligent Back-up Intervention system is ON	On
		When the Intelligent Back-up Intervention system is OFF	Off
BCI SWITCH	NOTE: The item is displayed, but not used		Off
BCI ON IND	Ignition switch ON	When Intelligent Back-up Intervention ON indicator is ON	On
		When Intelligent Back-up Intervention ON indicator is OFF	Off
BCI OFF IND	Ignition switch ON	When Intelligent Back-up Intervention OFF indicator is ON	On
		When Intelligent Back-up Intervention OFF indicator is OFF	Off
BCI WARNING IND	Ignition switch ON	When Intelligent Back-up Intervention malfunction indicator is ON	On
		When Intelligent Back-up Intervention malfunction indicator is OFF	Off
BCI HI TEMP WARN IND	Ignition switch ON	When Intelligent Back-up Intervention not available indicator is ON	On
		When Intelligent Back-up Intervention not available indicator is OFF	Off