Data Monitor
|
Monitored item [Unit] |
ALL SIG (ICC) |
MAIN SIG (ICC) |
MAIN SIG (LDW/LDP) |
MAIN SIG (BSW/BSI) |
MAIN SIG (BCI) |
Description |
|||||
|
MAIN SW [On/Off] |
X |
X |
X |
X |
Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication) |
||||||
|
SET/COAST SW [On/Off] |
X |
X |
Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication) |
||||||||
|
CANCEL SW [On/Off] |
X |
X |
Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication) |
||||||||
|
RESUME/ACC SW [On/Off] |
X |
X |
Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication) |
||||||||
|
DISTANCE SW [On/Off] |
X |
Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication) |
|||||||||
|
CRUISE OPE [On/Off] |
X |
X |
Indicates whether controlling or not (ON means "controlling") |
||||||||
|
ON ROOT GUIDANCE [On/Off] |
X |
NOTE:
The item is displayed, but not used
|
|||||||||
|
BRAKE SW [On/Off] |
X |
X |
X |
X |
X |
Indicates [On/Off] status as judged from ICC brake switch signal (ECM transmits ICC brake switch signal through CAN communication) |
|||||
|
STOP LAMP SW [On/Off] |
X |
X |
X |
X |
X |
Indicates [On/Off] status as judged from stop lamp switch signal (ECM transmits stop lamp switch signal through CAN communication) |
|||||
|
CLUTCH SW SIG [On/Off] |
X |
X |
X |
X |
NOTE:
The item is displayed, but not used
|
||||||
|
IDLE SW [On/Off] |
X |
X |
Indicates [On/Off] status of idle switch read from ADAS control unit through CAN communication (ECM transmits On/Off status through CAN communication) |
||||||||
|
SET DISTANCE [Short/Mid/Long] |
X |
X |
Indicates set distance memorized in ADAS control unit |
||||||||
|
CRUISE LAMP [On/Off] |
X |
X |
Indicates [On/Off] status of MAIN switch indicator output |
||||||||
|
OWN VHCL [On/Off] |
X |
Indicates [On/Off] status of own vehicle indicator output |
|||||||||
|
VHCL AHEAD [On/Off] |
X |
Indicates [On/Off] status of vehicle ahead detection indicator output |
|||||||||
|
ICC WARNING [On/Off] |
X |
Indicates [On/Off] status of ICC system warning lamp output |
|||||||||
|
VHCL SPEED SE [km/h] or [mph] |
X |
X |
X |
X |
X |
Indicates vehicle speed calculated from ADAS control unit through CAN communication [ABS actuator and electric unit (control unit) transmits vehicle speed signal (wheel speed) through CAN communication] |
|||||
|
SET VHCL SPD [km/h] or [mph] |
X |
X |
Indicates set vehicle speed memorized in ADAS control unit |
||||||||
|
BUZZER O/P [On/Off] |
X |
X |
Indicates [On/Off] status of ICC warning chime output |
||||||||
|
THRTL SENSOR [deg] |
X |
X |
NOTE:
The item is displayed, but not used
|
||||||||
|
ENGINE RPM [RPM] |
X |
Indicates engine speed read from ADAS control unit through CAN communication (ECM transmits engine speed signal through CAN communication) |
|||||||||
|
WIPER SW [OFF/LOW/HIGH] |
X |
Indicates wiper [OFF/LOW/HIGH] status (BCM transmits front wiper request signal through CAN communication) |
|||||||||
|
NAVI-ICC DISP [On/Off] |
X |
NOTE:
The item is displayed, but not used
|
|||||||||
|
YAW RATE [deg/s] |
X |
NOTE:
The item is displayed, but not used
|
|||||||||
|
BA WARNING [On/Off] |
X |
Indicates [On/Off] status of Automatic Emergency Braking warning lamp output |
|||||||||
|
STP LMP DRIVE [On/Off] |
X |
X |
X |
Indicates [On/Off] status of ICC brake hold relay drive output |
|||||||
|
D RANGE SW [On/Off] |
X |
Indicates [On/Off] status of "D" or "M" positions read from ADAS control unit through CAN communication; ON when position "D" or "M" (TCM transmits shift position signal through CAN communication). |
|||||||||
|
NP RANGE SW [On/Off] |
X |
Indicates shift position signal read from ADAS control unit through CAN communication (TCM transmits shift position signal through CAN communication) |
|||||||||
|
PKB SW [On/Off] |
X |
Parking brake switch status [On/Off] judged from the parking brake switch signal that ADAS control unit readout via CAN communication is displayed (combination meter transmits the parking brake switch signal via CAN communication) |
|||||||||
|
PWR SUP MONI [V] |
X |
X |
Indicates IGN voltage input by ADAS control unit |
||||||||
|
VHCL SPD AT [km/h] or [mph] |
X |
Indicates vehicle speed calculated from A/T vehicle speed sensor read from ADAS control unit through CAN communication (TCM transmits A/T vehicle speed sensor signal through CAN communication) |
|||||||||
|
THRTL OPENING [%] |
X |
X |
X |
Indicates throttle position read from ADAS control unit through CAN communication (ECM transmits accelerator pedal position signal through CAN communication). |
|||||||
|
GEAR [1, 2, 3, 4, 5, 6, 7] |
X |
Indicates A/T gear position read from ADAS control unit through CAN communication (TCM transmits current gear position signal through CAN communication) |
|||||||||
|
NP SW SIG [On/Off] |
X |
NOTE:
The item is displayed, but not used
|
|||||||||
|
MODE SIG [OFF, ICC, ASCD] |
X |
Indicates the active mode from ICC or ASCD [conventional (fixed speed) cruise control mode] |
|||||||||
|
SET DISP IND [On/Off] |
X |
Indicates [On/Off] status of SET switch indicator output |
|||||||||
|
DISTANCE [m] |
X |
Indicates the distance from the vehicle ahead |
|||||||||
|
RELATIVE SPD [m/s] |
X |
Indicates the relative speed of the vehicle ahead |
|||||||||
|
DYNA ASIST SW [On/Off] |
X |
X |
X |
Indicates [On/Off] status as judged from ICC steering switch signal |
|||||||
|
DCA ON IND [On/Off] |
X |
The status [ON/OFF] of Intelligent Distance Control system switch indicator output is displayed |
|||||||||
|
DCA VHL AHED [On/Off] |
X |
The status [ON/OFF] of vehicle ahead detection indicator output in Intelligent Distance Control system is displayed |
|||||||||
|
IBA SW [On/Off] |
X |
X |
NOTE:
The item is displayed, but not used
|
||||||||
|
FCW SYSTEM ON [On/Off] |
X |
X |
Indicates [On/Off] status of Intelligent Forward Collision Warning system |
||||||||
|
APA TEMP [°C] |
X |
X |
Accelerator pedal actuator integrated motor temperature that the ADAS control unit readout via ITS communication is displayed (Accelerator pedal actuator transmits the integrated motor temperature via ITS communication) |
||||||||
|
APA PWR [V] |
X |
X |
Accelerator pedal actuator power supply voltage that the ADAS control unit readout via ITS communication is displayed (Accelerator pedal actuator transmits the power supply voltage via ITS communication) |
||||||||
|
LDW SYSTEM ON [On/Off] |
X |
Indicates [On/Off] status of LDW system |
|||||||||
|
LDW ON LAMP [On/Off] |
X |
Indicates [On/Off] status of LDW system ON display output |
|||||||||
|
LDP ON IND [On/Off] |
X |
Indicates [On/Off] status of Intelligent Lane Intervention system display output |
|||||||||
|
LANE DPRT W/L [On/Off] |
X |
Indicates [On/Off] status of LDW/Intelligent Lane Intervention warning display (Yellow) output |
|||||||||
|
LDW BUZER OUTPUT [On/Off] |
X |
Indicates [On/Off] status of warning buzzer output |
|||||||||
|
LDP SYSTEM ON [On/Off] |
X |
Indicates [On/Off] status of Intelligent Lane Intervention system |
|||||||||
|
WARN REQ [On/Off] |
X |
Indicates an ADAS control unit judged warning state (ON/OFF) of Intelligent Lane Intervention system |
|||||||||
|
READY signal [On/Off] |
X |
Indicates Intelligent Lane Intervention system settings |
|||||||||
|
Camera lost [Detect/Deviate/Both] |
X |
X |
Indicates a lane marker detection state judged from a lane marker detection signal read by the ADAS control unit via ITS communication (Lane camera unit transmits a lane marker signal via ITS communication) |
||||||||
|
Shift position [Off, P, R, N, D, M/T1 - 7] |
X |
X |
X |
Indicates shift position read from ADAS control unit through CAN communication (TCM transmits shift position signal through CAN communication) |
|||||||
|
Turn signal [OFF/LH/RH/LH&RH] |
X |
X |
Indicates turn signal operation status read from ADAS control unit through CAN communication (BCM transmits turn indicator signal through CAN communication) |
||||||||
|
SIDE G [G] |
X |
X |
Indicates lateral G acting on the vehicle. This lateral G is judged from a side G sensor signal read by ADAS control unit via CAN communication (The ABS actuator and electric unit (control unit) transmits a side G sensor signal via CAN communication) |
||||||||
|
STATUS signal [Stnby/Warn/Cancl/Off] |
X |
Indicates a control state of Intelligent Lane Intervention system |
|||||||||
|
Lane unclear [On/Off] |
X |
X |
Indicates an ON/OFF state of the lane marker. The ON/OFF state is judged from a detected lane condition signal read by the ADAS control unit via ITS communication (The lane camera unit transmits a detected lane condition signal via ITS communication) |
||||||||
|
FUNC ITEM [FUNC 3] |
X |
X |
X |
X |
Indicates systems which can be set to ON/OFF by selecting "Driver Assistance" - "Dynamic Assistance Setting" of the integral switch FUNC3: Intelligent Distance Control, Intelligent Lane Intervention, Intelligent Blind Spot Intervention |
||||||
|
FUNC ITEM (NV-ICC) [Off] |
X |
X |
X |
X |
NOTE:
The item is displayed, but not used
|
||||||
|
FUNC ITEM (NV-DCA) [Off] |
X |
X |
X |
X |
NOTE:
The item is displayed, but not used
|
||||||
|
DCA SELECT [On/Off] |
X |
X |
X |
X |
Indicates an ON/OFF state of the Intelligent Distance Control system. The Intelligent Distance Control system can be set to ON/OFF by selecting "Driver Assistance"-"Dynamic Assistance Setting" of the integral switch |
||||||
|
LDP SELECT [On/Off] |
X |
X |
X |
X |
Indicates an ON/OFF state of Intelligent Lane Intervention system. Intelligent Lane Intervention system can be set to ON/OFF by selecting "Driver Assistance"-"Dynamic Assistance Setting" of the integral switch |
||||||
|
BSI SELECT [On/Off] |
X |
X |
X |
X |
Indicates an ON/OFF state of Intelligent Blind Spot Intervention system. Intelligent Blind Spot Intervention system can be set to ON/OFF by selecting "Driver Assistance"-"Dynamic Assistance Setting" of the integral switch |
||||||
|
BSW SELECT [On/Off] |
X |
X |
X |
X |
Indicates an ON/OFF state of the BSW system. The BSW system can be set to ON/OFF by selecting "Driver Assistance"-"Dynamic Assistance Setting" of the integral switch |
||||||
|
NAVI ICC SELECT [Off] |
X |
X |
X |
X |
NOTE:
The item is displayed, but not used
|
||||||
|
NAVI DCA SELECT [Off] |
X |
X |
X |
X |
NOTE:
The item is displayed, but not used
|
||||||
|
SYS SELECTABILITY [On/Off] |
X |
X |
X |
X |
Indicates the availability of ON/OFF switching for "Driver Assistance" items received from the display control unit via CAN communication |
||||||
|
4WD SW [AUTO/4H/4L] |
X |
X |
X |
X |
Indicates [On/Off] status as judged from current 4WD mode signal (Transfer control unit transmits current 4WD mode signal through CAN communication) |
||||||
|
WARN SYS SW [On/Off] |
X |
X |
X |
X |
Indicates [On/Off] status of warning systems switch |
||||||
|
BSW/BSI WARN LMP [On/Off] |
X |
Indicates [On/Off] status of Blind Spot Warning malfunction |
|||||||||
|
BSI ON IND [On/Off] |
X |
Indicates [On/Off] status of Intelligent Blind Spot Intervention system display |
|||||||||
|
BSW SYSTEM ON [On/Off] |
X |
Indicates [On/Off] status of BSW system |
|||||||||
|
BSI SYSTEM ON [On/Off] |
X |
Indicates [On/Off] status of Intelligent Blind Spot Intervention system |
|||||||||
|
BCI SYSTEM ON [On/Off] |
X |
Indicates [On/Off] status of Intelligent Back-up Intervention system |
|||||||||
|
BCI SWITCH [On/Off] |
X |
NOTE:
The item is displayed, but not used
|
|||||||||
|
BCI ON IND [On/Off] |
X |
Indicates [On/Off] status of Intelligent Back-up Intervention ON indicator |
|||||||||
|
BCI OFF IND [On/Off] |
X |
Indicates [On/Off] status of Intelligent Back-up Intervention OFF indicator |
|||||||||
|
BCI WARNING IND [On/Off] |
X |
Indicates [On/Off] status of Intelligent Back-up Intervention malfunction indicator |
|||||||||
|
BCI HI TEMP WARN IND [On/Off] |
X |
Indicates [On/Off] status of Intelligent Back-up Intervention not available indicator |
|||||||||