DTC Confirmation Procedure
- CHECK SELF-DIAG RESULT
With CONSULT
- Turn ignition switch ON.
- Perform "Self Diagnostic Result" mode of "AIR BAG" using CONSULT.
Without CONSULT
- Turn ignition switch ON.
- Check the air bag warning lamp status. Refer to Diagnosis Description ..
NOTE: SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.Is malfunctioning part detected?
YES
Refer to DTC Diagnosis Procedure ..
NO
To check malfunction symptom before repair: Refer to Inspection ..
NO
Confirmation after repair: INSPECTION END