LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX80 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Engine Control System (Introduction)) >> System Description >> Diagnosis System (ECM) >> Driving Pattern >> Driving Pattern C
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driving Pattern C

WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Driving pattern C means operating vehicle as per the following:

The following conditions should be satisfied at the same time:

Engine speed: (Engine speed in the freeze frame data) ±375 rpm

Calculated load value: (Calculated load value in the freeze frame data) x (1±0.1) [%]

Engine coolant temperature condition:

NOTE:
  • When the same malfunction is detected regardless of the above vehicle conditions, reset the counter of driving pattern C.
  • When the above conditions are satisfied without detecting the same malfunction, reset the counter of driving pattern C.
  • The 1st trip DTC will be cleared when C counter is counted once without the same malfunction after DTC is stored in ECM.