LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX80 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Brake Control System) >> System Description >> System >> Fail-safe >> EBD Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EBD Function

WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

ABS warning lamp, brake warning lamp and VDC warning lamp in combination meter turn ON when a malfunction occurs in system [ABS actuator and electric unit (control unit)]. The control is suspended for VDC function, TCS function, ABS function, EBD function, hill start assist function and brake limited slip differential (BLSD) function. The vehicle status becomes the same as models without VDC function, TCS function, ABS function, EBD function, hill start assist function and brake limited slip differential (BLSD) function.

DTC

Malfunction detected condition

Fail-safe condition

C1101

When an open circuit is detected in rear RH wheel sensor circuit.

The following functions are suspended.

  • VDC function
  • TCS function
  • ABS function
  • EBD function (only when both 2 rear wheels are malfunctioning)
  • hill start assist function
  • Brake limited slip differential (BLSD) function

C1102

When an open circuit is detected in rear LH wheel sensor circuit.

C1103

When an open circuit is detected in front RH wheel sensor circuit.

C1104

When an open circuit is detected in front LH wheel sensor circuit.

C1105
  • When power supply voltage of rear RH wheel sensor is low.
  • When distance between rear RH wheel sensor and rear RH wheel sensor rotor is large.
  • When installation of rear RH wheel sensor or rear RH wheel sensor rotor is not normal.

C1106
  • When power supply voltage of rear LH wheel sensor is low.
  • When distance between rear LH wheel sensor and rear LH wheel sensor rotor is large.
  • When installation of rear LH wheel sensor or rear LH wheel sensor rotor is not normal.

C1107
  • When power supply voltage of front RH wheel sensor is low.
  • When distance between front RH wheel sensor and front RH wheel sensor rotor is large.
  • When installation of front RH wheel sensor or front RH wheel sensor rotor is not normal.

C1108
  • When power supply voltage of front LH wheel sensor is low.
  • When distance between front LH wheel sensor and front LH wheel sensor rotor is large.
  • When installation of front LH wheel sensor or front LH wheel sensor rotor is not normal.

C1109
  • When ignition voltage is 10 V or less.
  • When ignition voltage is 16 V or more.

The following functions are suspended.

  • VDC function
  • TCS function
  • ABS function
  • EBD function
  • hill start assist function
  • Brake limited slip differential (BLSD) function

C1111
  • When a malfunction is detected in motor or motor relay.
  • When a low pressure malfunction is detected in accumulator.
  • When a malfunction is detected in accumulator pressure sensor.

C1115

When difference in wheel speed between any wheel and others is detected during the vehicle is driven, because of installation of other tires than specified.

The following functions are suspended.

  • VDC function
  • TCS function
  • ABS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function

C1116
  • When stop lamp switch signal is not input when brake pedal depress.
  • When stop lamp switch signal is not input when stop lamp relay operates.

C1118 *1

When a malfunction is detected in transfer control unit system.

C1120

When a malfunction is detected in front LH ABS IN valve.

The following functions are suspended.

  • VDC function
  • TCS function
  • ABS function
  • EBD function
  • hill start assist function
  • Brake limited slip differential (BLSD) function

C1121

When a malfunction is detected in front LH ABS OUT valve.

C1122

When a malfunction is detected in front RH ABS IN valve.

C1123

When a malfunction is detected in front RH ABS OUT valve.

C1124

When a malfunction is detected in rear LH ABS IN valve.

C1125

When a malfunction is detected in rear LH ABS OUT valve.

C1126

When a malfunction is detected in rear RH ABS IN valve.

C1127

When a malfunction is detected in rear RH ABS OUT valve.

C1130

When a malfunction is detected in ECM system.

The following functions are suspended.

  • VDC function
  • TCS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function

C1140

When a malfunction is detected in actuator relay.

The following functions are suspended.

  • VDC function
  • TCS function
  • ABS function
  • EBD function
  • hill start assist function
  • Brake limited slip differential (BLSD) function

C1142 *2

When a malfunction is detected in master cylinder pressure sensor or control pressure sensor .

The following functions are suspended.

  • VDC function
  • TCS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function

C1143

When a malfunction is detected in steering angle sensor.

C1144

When neutral position adjustment of steering angle sensor is not complete.

C1145
  • When a malfunction is detected in yaw rate signal.
  • When yaw rate signal is not continuously received for 2 seconds or more.
  • When side G signal is not continuously received for 2 seconds or more.
  • When decel G signal is not continuously received for 2 seconds or more.

The following functions are suspended.

  • VDC function
  • TCS function
  • ABS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function

C1146

When a malfunction is detected in side/decel G signal.

C1155
  • When brake fluid level low signal is detected.
  • When an open circuit is detected in brake fluid level switch circuit.

The following functions are suspended.

  • VDC function
  • TCS function
  • ABS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function

C1160

When calibration of yaw rate/side/decal G sensor is not complete.

C1164

When a malfunction is detected in cut valve 1.

The following functions are suspended.

  • VDC function
  • TCS function
  • ABS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function

C1165

When a malfunction is detected in cut valve 2.

C1166

When a malfunction is detected in suction valve 1.

C1167

When a malfunction is detected in suction valve 2.

C1170

When the information in ABS actuator and electric unit (control unit) is not the same.

The following functions are suspended.

  • VDC function
  • TCS function
  • ABS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function

C118E

When performing excessive brake pedal operation with the vehicle stopped. [When accumulator fluid pressure reaches 11.43 MPa (114 bar, 116.6 kg/cm 2 , 1657 psi) after reaching 17.3 MPa (173 bar, 176.5 kg/cm 2 , 2509 psi.]

The following functions are suspended.

  • VDC function
  • TCS function
  • ABS function
  • EBD function
  • hill start assist function
  • Brake limited slip differential (BLSD) function

U1000

When CAN communication signal is not continuously received for 2 seconds or more.

The following functions are suspended.

  • VDC function
  • TCS function
  • ABS function
  • hill start assist function
  • Brake limited slip differential (BLSD) function

*1: Models with 4WD System

*2: Models with Advanced Driver Assistance System

scientia non olet · About LEMON Manuals