Work Support Mode

Work Item

Work item	Full spell	Usage
RESETTING OF ADOPTION VALUES	RESETTING OF ADOPTION VALUES	Use after a repair on the charge air system and fuel mixture generation including all affected components
ACTIVATION OF FUEL PUMP	ACTIVATION OF FUEL PUMP	Use after ECM and FPCM change
TEACH IN OF CAMSHART POSITION	TEACH IN OF CAMSHART POSITION	Use after one of the following components: Replace the engine Remove of timing chain Remove intake camshaft actuator or exhaust camshaft actuator.
TEACH IN OF THROTTLE VALVE STOP	TEACH IN OF THROTTLE VALVE STOP	Use after replacing ECM or throttle valve actuator
STATUS OF TEACH IN PROCESSES	STATUS OF TEACH IN PROCESSES	Use to check status of teach-in processes
INJECTOR INJECTION QUANTITY ADJUSTMENT	INJECTOR INJECTION QUANTITY ADJUSTMENT	Use after replacing ECM or fuel injector
VIN REGISTRATION	VIN REGISTRATION	Used when registering VIN in ECM
STRT OPRTN CNTR CLEAR	STARTER OPERATION COUNTER CLEAR	Use after replacing starter motor
H/P FUEL PUMP STARTS COUNTER CLEAR	HIGH PRESSURE FUEL PUMP STARTS COUNTER CLEAR	Use after replacing high pressure fuel pump
SAVING DATA FOR REPLC CPU	SAVING DATA FOR REPLACING CPU	Use before replacing ECM
WRITING DATA FOR REPLC CPU	WRITING DATA FOR REPLACING CPU	Used when writing data stored by "SAVING DATA FOR REPLC CPU" to ECM
CAMSHAFT REFERENCE ADAPTATION	CAMSHAFT REFERENCE ADAPTATION	Use after one of the following components: Replace the engine Remove of timing chain Remove intake camshaft actuator or exhaust camshaft actuator.
Teach in of sensor rotor adaptation	Teach in of sensor rotor adaptation	Follow the instruction of CONSULT display.
Corrctn progrmng fuel quantity	Correction programming fuel quantity	Follow the instruction of CONSULT display.
Correction programming of ignition	Correction programming of ignition	Follow the instruction of CONSULT display.