Self Diagnostic Result Mode
Self Diagnostic Item
Regarding items of DTC, refer to DTC Index .
How to Read DTC
DTCs related to the malfunction are displayed in "self-diag results".
- When EMCM has detected a current DTC, "0" is displayed for "TIME".
- If "TIME" is neither "0" nor "1t", the DTC occurred in the past and EMCM shows the number of times the vehicle has been driven since the last detection of the DTC.
How to Erase DTC
NOTE:
If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.