DTC Confirmation Procedure
- DTC REPRODUCTION PROCEDURE
With CONSULT
- Turn the ignition switch OFF and wait for at least 10 seconds.
Start the engine.
CAUTION: Never drive the vehicle. - Perform self-diagnosis for "EPS/DAST 3".
Is DTC "C13D9-00" detected?
YES
Proceed to diagnosis procedure. Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: INSPECTION END
- Turn the ignition switch OFF and wait for at least 10 seconds.