Self-Diag Results Mode
Refer to DTC Index .
When "CRNT" is displayed on self-diagnosis result.
- The system is presently malfunctioning.
When "PAST" is displayed on self-diagnosis result.
- System malfunction in the past is detected, but the system is presently normal.
Freeze Frame Data (FFD)
The following vehicle status is recorded when DTC is detected and is displayed.
|
Freeze Frame Data Item |
Unit |
Description |
|
ODO/TRIP METER |
Km |
Display the odometer value from combination meter via CAN communication. |
|
BATTERY VOLT |
V |
Displays the power supply voltage for power steering control module. |
|
IGN SW |
OFF/ON |
Display the status of ignition switch. |
|
ENGINE STATUS |
STOP/RUN/CRANK |
Displays the engine status based on the engine status signal transmitted by CAN communications. |
|
Steering mode status |
Standard/Sports/Touring |
Displays the status of steering mode based on the steering mode status signal transmitted by CAN communications. |
|
VEHICLE SPEED |
km/h |
Display the vehicle speed from vehicle speed signal via CAN communication. |
|
STEERING ANGLE SIGNAL |
deg |
Displays the steering angle based on steering angle signal transmitted by CAN communications. |
|
STEERING ANGLE SPEED |
deg/s |
Displays the steering angle speed based on the steering angle signal transmitted by CAN communications. |
|
STEERING TORQUE |
Nm |
Displays steering torque detected by torque sensor. |
|
MOTOR CURRENT |
A |
Display the current value consumed by EPS motor. |
|
Target motor current |
A |
Displays the target motor current value. |
|
C/U TEMP |
deg.C |
Displays the temperature of the power steering control module. |