Component Inspection (FPCM)

1. Check the voltage between FPCM terminals under the following conditions.

   FPCM			Condition	Voltage
   Connector	+	-
   	Terminal	Terminal
   B11	1	2	For 1 second after turning ignition switch ON	Approx. 9.9 V
   			More than 1 second after turning ignition switch ON	Approx. 0 V
   			Idle speed	Approx. 9.9 V

Is the inspection result normal?

YES

INSPECTION END

NO

Replace FPCM. Refer to Removal and Installation .