Component Inspection (Throttle Control Motor)
- CHECK THROTTLE CONTROL MOTOR
- Turn ignition switch OFF.
- Disconnect electric throttle control actuator harness connector.
- Check resistance between electric throttle control actuator terminals as per the following.
Electric throttle control actuator
Condition
Resistance (Ohm)
Bank
Terminals
1
1 and 2
Temperature
25 deg.C (77 deg.F)
1 - 15
2
1 and 2
Is the inspection result normal?
YES
INSPECTION END
NO
Replace malfunctioning electric throttle control actuator. Refer to Exploded View .