LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2019 >> Q60 Pure, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (8 Of 13) >> DTC/Circuit Diagnosis >> DTC P1334: TC System >> DTC Description >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. CHECK DTC PRIORITY 

    If DTC P1334 is displayed with DTC P0241 or P0242, first perform the trouble diagnosis for DTC P0241 or P0242.

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. Refer to DTC Description .

    NO

    GO TO 2.

  2. PERFORM COMPONENT FUNCTION CHECK 
    NOTE: Use component function check to check the overall function of turbocharger system circuit.
    1. Turn ignition switch ON and engine stopped.
    2. On the CONSULT screen, select "ENGINE">>"ACTIVE TEST">>"WASTEGATE ACTUATOR".
    3. Operate "Up" or "Down", set "W/G ACTUATOR POSITION B2" to 0.002 m, and make a quick short note of value "V1" of "W/G ACTUATOR POSI SEN B2".
    4. Operate "Up" or "Down", set "W/G ACTUATOR POSITION B2" to 0.006 m, and make a quick short note of value "V2" of "W/G ACTUATOR POSI SEN B2".

    Do the values of "V1" and "V2" change (visually, ACTUATOR SHAFT operates) and "V2" minus "V1" becomes equal to or more than 1.3 V?

    YES

    To check malfunction symptom before repair: Refer to Intermittent Incident .

    YES

    Confirmation after repair: INSPECTION END

    NO

    Proceed to Diagnosis Procedure .

scientia non olet · About LEMON Manuals