Work Procedure

SAVING VEHICLE SPECIFICATION
CONSULT Configuration

Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to Description .

NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.

GO TO 2.
REPLACE BCM
Replace BCM. Refer to Removal and Installation .

GO TO 3.
WRITING VEHICLE SPECIFICATION
CONSULT Configuration

Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Work Procedure .

GO TO 4.
INITIALIZE BCM (NATS)
Perform BCM initialization. (NATS)

WORK END