Physical Values
|
Terminal No. |
Description |
Condition |
Value (Approx.) |
||
|
+ |
- |
Signal name |
Input/Output |
||
|
1 (LG) |
Ground |
Power steering solenoid valve voltage |
Output |
Vehicle speed: 0 km/h (0 MPH) (Engine is running) |
4.4 - 6.6 V |
|
Vehicle speed: 100 km/h (62 MPH) |
1.7 - 2.9 V |
||||
|
3 (G) |
Ground |
Ignition switch power supply |
Input |
Ignition switch: ON |
Battery voltage |
|
Ignition switch: OFF |
0 V |
||||
|
5 (B) |
Ground |
Power steering solenoid valve ground |
-- |
Always |
0 V |
|
6 (B) |
Ground |
Ground |
-- |
Always |
0 V |
|
8 (GR) |
Ground |
Vehicle speed signal |
Input |
Vehicle speed: 40 km/h (25 MPH)
CAUTION:
Check air pressure of tire under standard condition.
|
|
|
10 (V) |
Ground |
Engine speed signal |
Input |
Engine speed: At idle (Warm-up condition) |
VQ37VHR |
|
VK56VD |
|||||
|
Engine speed: Approx. 2, 000 RPM (Warm-up condition) |
VQ37VHR |
||||
|
VK56VD |
|||||
CAUTION:
When using circuit tester or oscilloscope to measure voltage for inspection, be sure not to forcibly extend any connector terminals.