Component Description

Part	Description
Drive mode select switch	Outputs an ON/OFF state of STANDARD, SPORT, ECO, or SNOW mode to the A/C auto amp.
A/C auto amp.	Receives an ON/OFF state of each mode from the drive mode select switch and transmits the switch signal to TCM, combination meter, 4WAS main control unit, and ADAS control unit via CAN communications.
Combination meter	Displays a mode state on the vehicle information display, based on the mode state received from the A/C auto amp.
ECM	Receives a mode signal from TCM and controls throttle angle characteristics and torque.
TCM	Selects a shift pattern, based on a mode state received from the A/C auto amp. Transmits a mode state received from the A/C auto amp. to ECM.
4WAS main control unit	Controls the steering characteristics of the front and rear wheels, based on a mode state received from the A/C auto amp.
ADAS control unit	Controls the active trace control function, based on a mode state received from the A/C auto amp. Controls accelerator pedal feedback force of the accelerator pedal actuator, based on a ECO pedal reaction force control signal received from ECM.
ABS actuator and electric unit	Activates the ABS actuator, according to an active trace control function control signal received from the ADAS control unit.
Accelerator pedal actuator	Applies feedback force to the accelerator pedal, based on an accelerator pedal feedback force control signal received from the ADAS control unit.