Automatic Fill Detection Function
- Automatic fill detection takes place, if at the start of a journey a pressure change of more than 20 kPa (0.2 bar, 0.2 kgf/cm2 , 2.9 psi) has been detected at a least 2 wheels.
- For comparison, temperature-compensated and filtered pressure values are drawn on and compared against the values for the last journey.
- After approx. 5 minutes journey and a successful plausibility check, the new tire pressures are automatically adopted as specified values. A pressure differential between the right and left wheel of 17% or more is regarded as implausible.