LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2019 >> QX30 Essential, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Unit Disassembly And Assembly >> Input Shaft >> Disassembly and Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly and Assembly: Assembly

  1. Using sleeve [SST: KV325H0700 (TechMate No. -) (DAIMLER tool No. 168 589 01 14 00)] install the 3rd gear from drive shaft.
  2. Using suitable tool install the sensor rotor from drive shaft.
    CAUTION: Never reuse sensor rotor.
  3. Install 5th and 7th gear from drive shaft.
  4. Install needle bearings.
scientia non olet · About LEMON Manuals