Work Procedure

With CONSULT

1. Turn ignition switch ON.
2. On the consult screen, select "ENGINE" >> "WORK SUPPORT" >> "TEACH IN OF CAMSHAFT POSITION".
3. Touch "Start".

GO TO 2.

With CONSULT

1. Start the engine and let it idle.
2. Check the following conditions.

   ENGINE SPEED	500 1/min engine speed 1, 000 1/min
   COOLANT TEMPERATURE	60 deg.C (140 deg.F) temperature 90 deg.C (194 deg.F)

Is the condition satisfied?

YES

GO TO 3.

NO

Satisfy the condition, and GO TO 3.

With CONSULT

1. Touch "Start" and wait a few seconds.
2. Touch "Continue" and wait a few seconds.

Is "COMPLETED" displayed on CONSULT screen?

YES

END

NO

Follow the instruction of consult display.