October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
System Diagram
 Courtesy of NISSAN NORTH AMERICA, INC.
|
INPUT/OUTPUT SIGNAL
Major signal transmission between each unit via communication lines is shown in the following table.
|
Component
|
Signal description
|
|
Electronic stability program control unit
|
- Transmits mainly the following signals to EPS control unit via CAN communication.
- Front LH wheel speed signal
- Front RH wheel speed signal
- Rear LH wheel speed signal
- Rear RH wheel speed signal
- Steering assistance torque request signal
- Yaw rate signal
- Side G signal
|
|
ECM
|
- Transmits mainly the following signal to EPS control unit via CAN communication.
|
|
Combination meter
|
- Receives mainly the following signals from EPS control unit via CAN communication.
- EPS warning message signal
|
|
Steering column control module
|
- Transmits mainly the following signals to EPS control unit via CAN communication.
- Steering angle sensor signal
|
|
Electronic ignition switch control unit
|
- Transmits mainly the following signal to EPS control unit via CAN communication.
- Ignition switch ON signal
- Battery voltage signal
|
|
Sonar control unit
|
- Transmits mainly the following signals to EPS control unit via CAN communication.
- Park assist status signal
- Steering angle command signal
- Receives mainly the following signals from EPS control unit via CAN communication.
- EPS control unit status signal
|