Self Diagnosis Result

Refer to DTC Index .
In CONSULT self-diagnosis, self-diagnosis results and error history are displayed collectively.
The current malfunction indicates "CRNT". The past malfunction indicates "PAST".
The timing is displayed as "0" if any of the error codes [U1000] and [U1010] is detected. The counter increases by 1 if the condition is normal at the next ignition switch ON cycle.

Freeze Frame Data (FFD)

The following vehicle status is recorded when DTC is detected and is displayed on CONSULT.

Item name

Display content

IGN counter

(0 to 39)

Numerical value is displayed indicating the number of times that ignition switch is turned ON after the DTC is detected.

When "0" is displayed, it indicates that the system is presently malfunctioning.
When any numerical number other than "0" is displayed, it indicates that system malfunction in the past is detected, but the system is presently normal.
NOTE: Each time when ignition switch turns OFF->ON, numerical number increases from 1->2->3...38->39. When number of times exceeds 39, numeric display does not increase and 39 is displayed until self-diagnosis is erased.