Confirmation/Adjustment Mode

Start the diagnosis function and select "Confirmation/Adjustment". The confirmation/adjustment mode indicates where each item can be checked or adjusted.
Select each switch on the "Confirmation/Adjustment Mode" screen to display the relevant trouble diagnosis screen. Touch the "Back" to return to the initial Confirmation/Adjustment Mode screen.

Display Diagnosis

Confirmation of the display control unit screen.

Item		Description
Display Settings	Color Spectrum Bar	Display 7 colors of following bars. White Yellow Cyan (Close to light blue) Green Magenta (Close to purplish red) Red Blue
	Gradation Bar	Display 64 gradation gray-scale image to a screen.
	White Display	Display white screen.
	Black Display	Display black screen.
Touch Panel		The function can check the presence of a "+" indication and deviation from where it should be while touching the touch panel. Display coordinates and gesture operation name (Drag, Tap, Double Tap, Spread, etc.) of the screen which touched.
Sensor Sensitivity Settings		Display a current touch panel sensor sensitivity set value. Can change the touch panel sensor sensitivity set value with 1 (Low) - 5 (high) phases.

Vehicle Signals

A comparison check can be made of each actual vehicle signal and the signals recognized by the system.

Display control unit

Diagnosis item	Display	Vehicle status	Remarks
Vehicle Speed	ON	Vehicle speed > 0 km/h (0 MPH)	Changes in indication may be delayed. This is normal.
Vehicle Speed	OFF	Vehicle speed = 0 km/h (0 MPH)
Parking Brake Signal	ON	Parking brake is applied.
Parking Brake Signal	OFF	Parking brake is released.
Light Signal	ON	Block the light beam from the auto light optical sensor when the light switch is ON.	--
Light Signal	OFF	Either of the following conditions Lighting switch OFF. Expose the auto light optical sensor to light when the light switch is ON.	--
Ignition Signal	ON	Ignition switch ON.	--
Ignition Signal	OFF	Ignition switch in ACC position.	--
Reverse Signal	ON	Shift the selector lever to "R" position.	Changes in indication may be delayed. This is normal.
Reverse Signal	OFF	Shift the selector lever other than "R" position.	Changes in indication may be delayed. This is normal.

NAVI control unit

Diagnosis item	Display	Vehicle status	Remarks
Vehicle Speed	ON	Vehicle speed > 0 km/h (0 MPH)	Changes in indication may be delayed. This is normal.
Vehicle Speed	OFF	Vehicle speed = 0 km/h (0 MPH)	Changes in indication may be delayed. This is normal.
Ignition Signal	ON	Ignition switch ON.	--
Ignition Signal	OFF	Ignition switch in ACC position.	--
Reverse Signal	ON	Shift the selector lever to "R" position.	Changes in indication may be delayed. This is normal.
Reverse Signal	OFF	Shift the selector lever other than "R" position.	Changes in indication may be delayed. This is normal.

NOTE: Only models with navigation system.

Speaker Test

Select "Speaker Test" to display the speaker diagnosis screen. Touch "Start" to generate a test tone in a speaker. Touch "Next" to generate a test tone in the next speaker. Touch "End" to stop the test tones.

Speaker Name

Front Instr. Panel Center Squawker

Front Door Left Sub Woofer

Front Door Right Sub Woofer

Front Door Left Tweeter

Front Door Right Tweeter

Rear Door Left Speaker

Rear Door Right Speaker

Rear Pillar Left Squawker

Rear Pillar Right Squawker

Rear Luggage Left Sub Woofer

Rear Luggage Right Sub Woofer

Navigation

Item	Description
Sensor Information	The reception status of GPS can be confirmed.
Route Simulation	Set the display ON/OFF of the "simulation" menu of the navigation.

NOTE: Only models with navigation system.

Error History

The self-diagnosis results are judged depending on whether any error occurs from when "Self-diagnosis" is selected until the self-diagnosis results are displayed.

However, the diagnosis results are judged normal if an error has occurred before the ignition switch is turned ON and then no error has occurred until the self-diagnosis start. Check the "Error Record" to detect any error that may have occurred before the self-diagnosis start because of this situation.

The error record displays the time and place of the most recent occurrence of that error. However, take note of the following points.

Place of the error occurrence is represented by the longitude and latitude at the time an error occurred. If current location mark has deviated from the correct position, then the place of the error occurrence cannot be located correctly.
The frequency of occurrence is displayed in a up-and-down manner.

Count up method

The counter resets to 0 if an error occurs when ignition switch is turned ON. The counter increases by 1 if the condition is normal at a next ignition ON cycle.
The counter upper limit is 39. Any counts exceeding 39 are ignored." The counter can be reset (no error record display) with the "Delete log" switch or CONSULT.

Display type of occurrence frequency	Error history display item
Count up method	CAN communication line, control unit (CAN), AV communication line, control unit (AV)

Error item

Some error items may be displayed simultaneously according to the cause. If some error items are displayed simultaneously, the detection of the cause can be performed by the combination of display items

Error item	Applicable DTC	Reference
TACHO signal failure	B1F01	DTC Description
CAN COMM CIRCUIT	U1000	DTC Description
CONTROL UNIT (CAN)	U1010	DTC Description
Control unit internal error	U121F	DTC Description
Mismatched configuration data stored	U1223	DTC Description
Amplifier temperature error	U1231	DTC Description
Steer. Angle Sensor calibration	U1232	DTC Description
Navi unit internal error	U1233	DTC Description
Audio unit internal error	U1234	DTC Description
Switches connection error	U1240	DTC Description
GPS Antenna error	U1244	DTC Description
Audio unit connection error	U1249	DTC Description
Bose AMP connection error	U124E	DTC Description
XM Antenna connection error : open	U1258	DTC Description
XM Antenna connection error : short	U1258	DTC Description
Navi unit connection error	U125D	DTC Description
TCU connection error	U1266	DTC Description
TGW connection error	U1267	DTC Description
IT Comander connection error	U12BA	DTC Description
Radio Antenna error : open	U12BE	DTC Description
Radio Antenna error : short	U12BE	DTC Description
AV COMM CIRCUIT	U1300	DTC Description
CONTROL UNIT (AV)	U1310	DTC Description
FL-DOOR WOOFER	U1601	DTC Description
FL-DOOR TWEETER	U1603	DTC Description
FR-DOOR WOOFER	U1609	DTC Description
FR-DOOR TWEETER	U160B	DTC Description
F-INST C-SQUAWKER	U162A	DTC Description
RL-DOOR SPEAKER	U1708	DTC Description
RR-DOOR SPEAKER	U1710	DTC Description
RL-PILLAR SQUAWKER	U1752	DTC Description
RR-PILLAR SQUAWKER	U175A	DTC Description
R-LUGGAGE L-WOOFER	U175D	DTC Description
R-LUGGAGE R-WOOFER	U1765	DTC Description

AV COMM Diagnosis

AV COMM Monitor

Displays the communication status between display control unit (master unit) and each unit.
The error counter displays "OK" if any malfunction was not detected in the past and displays "0" if a malfunction is detected. It increases by 1 if the condition is normal at the next ignition switch ON cycle. The upper limit of the counter is 39.

The error counter is erased if "Reset" is pressed.

Items	Status (Current)	Counter (Past)
CMF Send Switch	OK / UNKW	OK / 0 - 39 / --
CMF Receive Switch	OK / UNKW	OK / 0 - 39 / --
CMF Receive Bose® AMP	OK / UNKW	OK / 0 - 39 / --
CMF Receive TGW	OK / UNKW	OK / 0 - 39 / --
CMF Receive Audio	OK / UNKW	OK / 0 - 39 / --

Clock Setting

The date and time information can be adjusted.

NOTE: Only models with navigation system.

Camera Cont. (With Rear View Monitor)

Item	Description
Adjust Guide Line of Rear View Camera	The guiding lines in the rear view monitor can be adjusted.
Check/Change Configuration	Displays the current configuration data. NOTE: Refer to the following list for the items of the configuration adjustment function.
Reset Configuration	Initializes the camera system configuration.
Camera System Type	Sets the type of camera that is connected.

Configuration list

Setting item	Setting (Default value)
Predictive Course Lines	With (No SBW)
Rear Coeff. K	1.49591
Rear Coeff. F	0.14104
Rear Coeff. P1	-0.65196
Rear Coeff. P2	0.2805
Rear Coeff. C1	-0.03754
Rear Coeff. C2	-0.00001
Rear Coeff. D1	130.3
Rear Coeff. D2	-46.18
Car Width	1808.7
Rear Offset	3421.41
Rear Height	570.96
Rear L/R Angle	0
Rear Up/Dn Angle	0
Rear Roll Angle	0
Bumper Rear Dist.	0
Bumper Rear Axle Dist	0
Max. Steering Angle	32
Min. Turning Radius	1.39
Wheelbase	2699
Total Length	4425.9
Steering Gear Ratio	0.0403492

Camera Cont. (With Around View Monitor)

Item	Description
Adjust Guide Line of Rear View Camera	NOTE: This item displayed, but it is not used.
Check/Change Configuration
Reset Configuration
Camera System Type	Sets the type of camera that is connected.

Delete Unit Connection Log

Deletes any unit connection records and error records from the display control unit memory. (Clear the records of the unit that has been removed.)

Reset Settings

Item	Description
Reset User Data	Initializes the display control unit, NAVI control unit and AV control unit memory.
Reset Configuration	Initializes the configuration data.

Version Information

Version information of the each control unit and switch is displayed.

Program Update

Version of the display control unit can be update.

SXM

XM Mode Diagnosis

Item	Description
Show XM Diagnosis	Display adjustment items to test satellite radio function.
External Connection Mode	Set in external diagnostic mode.

Switch Information

Preset switch, multifunction switch and steering switch information can be checked.

Switch name and ID are displayed when press each switch.

Preset switch

Courtesy of NISSAN NORTH AMERICA, INC.

No.	Display (Panel Name)


	Radio
	Status
	DISC/AUX

	TUNE/CH/FULDER>
	Preset 1
	Preset 2
	Preset 3
	Preset 4
	Preset 5
	Preset 6

Multifunction switch

Courtesy of NISSAN NORTH AMERICA, INC.

No.	Display (Panel Name)
	Map
	MENU
	Camera or Back
	Back or Camera
	OK
	Audio
	Up
	Up/Left
	Left
	Down/Left
	Down
	Down/Right
	Right
	Up/Right

Steering switch

Courtesy of NISSAN NORTH AMERICA, INC.

No.	Display (STRG SW)
	Voice Recognition Engine
	TEL_Off
	VOL DOWN/Left
	TEL_On
	Audio ON/OFF
	VOL UP/Right

ANC/ASC Diagnosis

Item	Description
Show Settings	Following items can be confirmed. Part Number Software Version Config Result ASC ON/OFF status [Enabled: ON/OFF]
Connection Diagnosis	Display a state of wiring connected with in BOSE amp.
Active Test	ANC function can be confirmed by test tone. NOTE: This item is displayed, but not used.
Version	Version information of the each parts is displayed.

Hands-Free Phone

The hands-free phone reception volume adjustment and microphone and speaker test functions are also available.

Item	Description
Handsfree Volume	The reception volume can be set in 3 steps: "Low", "Mid" and "High".
Voice Microphone Test	The microphone audio can be directly connected to the speakers to perform a microphone test.