DTC Detection Logic
|
DTC No. |
CONSULT screen terms |
DTC detecting condition |
||
|
DTC (Trouble diagnosis content) |
Malfunction type |
|||
|
P0607 |
04 |
CONTROL MODULE (Control module performance) |
SYSTEM INTERNAL MALFUNCTN |
The control unit has a malfunction. There is an internal malfunction. |
|
09 |
COMPONENT MALFUNCTION |
The control unit has a malfunction. There is a component malfunction. |
||
|
10 |
-- |
The control unit has a malfunction. Reserved for ISO/SAE |
||
|
12 |
CIRCUIT SHORT TO BATTERY |
The control unit has a malfunction. There is a short circuit to positive. |
||
|
14 |
CIRC SHORT TO GRND OR OPEN |
The control unit has a malfunction. There is a short circuit to ground or an open circuit. |
||
|
16 |
CIRC VOLT BELOW THRESHOLD |
The control unit has a malfunction. The limit value for electrical voltage has not been attained. |
||
|
18 |
CIRC CRRNT BELOW THRESHLD |
The control unit has a malfunction. The limit value for current has not been attained. |
||
|
41 |
GENERAL CHECKSUM ERROR |
The control unit has a malfunction. There is a general checksum error. |
||
|
48 |
SUPERVISION SOFTWARE ERROR |
The control unit has a malfunction. There is an error in the control memory. |
||
|
62 |
SIGNAL COMPARE ERROR |
The control unit has a malfunction. The signal comparison is malfunctioning. |
||
|
64 |
SIGNAL PLAUSIBILITY ERROR |
The control unit has a malfunction. There is an implausible signal. |
||