Diagnosis Procedure
- CHECK HARNESS CONNECTOR
Check the harness connector for disconnection, looseness or damage.
Is the inspection result normal?
YES
GO TO 2.
NO
Damage: Replace malfunctioning harness and connector.
NO
Disconnection or looseness: Securely lock the connector.
- CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
GO TO 3.
NO
Replace malfunctioning harness and connector.
- REPLACE ELECTRONIC IGNITION SWITCH CONTROL UNIT
- Replace electronic ignition switch control unit. Refer to Removal and Installation .
- Perform DTC confirmation procedure. Refer to DTC Description .
Is DTC detected?
YES
GO TO 4.
NO
INSPECTION END
- REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
- Replace air bag diagnosis sensor unit. Refer to Removal and Installation .
- Perform DTC confirmation procedure. Refer to DTC Description .
Is DTC detected?
YES
GO TO 1.
NO
INSPECTION END