Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect electric intake valve timing control position sensor harness connector.
3. Disconnect electric intake valve timing control module harness connector.
4. Check the continuity between the electric intake valve timing control position sensor harness connector and the electric intake valve timing control module harness connector.

   Electric intake valve timing control position sensor		Electric intake valve timing control module		Continuity
   Connector	Terminal	Connector	Terminal
   F93	3	F91	9	Existed
   	4		35
   	5		6

5. Also check harness for short to power and short to ground.

Is the inspection result normal?

YES

GO TO 2.

NO

Repair or replace error-detected parts.

Check intermittent incident. Refer to Intermittent Incident .

Is the inspection result normal?

YES

Replace electric intake valve timing control actuator. Refer to Exploded View .

NO

Repair or replace error-detected parts.