Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect electric IVT control position sensor harness connector.
3. Disconnect electric IVT control module harness connector.
4. Check the continuity between electric IVT control position sensor harness connector and electric IVT control module harness connector.

   Electric IVT control position sensor		Electric IVT control module		Continuity
   Connector	Terminal	Connector	Terminal
   F93	3	F91	9	Existed
   	4		35
   	5		6

5. Check harness for short to power and short to ground.

Is the inspection result normal?

YES

GO TO 2

NO

Repair or replace error-detected parts.

Check intermittent incident. Refer to Intermittent Incident .

Is the inspection result normal?

YES

Replace electric IVT control actuator. Refer to Exploded View .

NO

Repair or replace error-detected parts.