Active Test

Test Item

Description

OUTSIDE BUZZER

This test is able to check Intelligent Key warning buzzer operation [On/Off].

INSIDE BUZZER

This test is able to check combination meter warning chime operation [Take Out/Knob/Key/Off].

INDICATOR

This test is able to check combination meter warning lamp operation [KEY ON/KEY IND/Off].

FLASHER

This test is able to check flasher operation [On/Off].

HORN

This test is able to check horn operation [On/Off].

IGN CONT2

This test is able to check ignition relay-2 control operation [On/Off].

ENGINE SW ILLUMI

This test is able to check push-button ignition switch START indicator operation [On/Off].

ENGINE START REQUEST

This test is able to check BCM starter request switch signal to IPDM E/R via CAN communication [MODE 1/MODE 2/MODE 3/OFF].

STARTER CUT RELAY

This test is able to check the starter control relay [On/Off].

AUTO ACC 2

This test is able to check BCM sends power supply to audio unit or NAVI control unit [On/Off].

AUTOMATIC BACK DOOR

This test is able to check automatic back door operation [On/Off].

AUTO ACC 1

This test is able to check BCM sends power supply to ACC relay [MODE 1/MODE 2/MODE 3/OFF].

TRUNK LUGGAGE LAMP TEST

This test is able to check luggage room lamp test operation [On/Off].